User Manual

6
POWERING THE LIGHT
CHANGING THE FUSE
1. With a Phillips head or
small slotted screwdriver,
turn the fuse holder a
quarter-turn counter-
clockwise. The fuse holder
will pop out of the socket.
2. Remove the fuse holder
from the device. Remove
the fuse from its holder.
3. Insert the replacement
fuse into the holder.
4. Reinstall the fuse holder to
the light fixture.
5. Using your screwdriver,
push the fuse holder back
into the socket and turn it
clockwise until secure.
The Raya Octa Fluorescent Fixture is a
multi-voltage 100~240VAC 50/60Hz
device, powered by a wall outlet.
The fixture power is controlled using the
two power switches on the back of the
unit. Each switch is dedicated to a set of
lights, as indicated by their associated illustrations. Switch one or both
of them to the ON position based on your desired lighting scenario.
NOTE: A power plug adapter will be necessary for use outside of North
America.