User Manual

INSTRUCTIONS

INSTALL THE LIGHTS

This product should be used with ﬂuorescent CFL light bulbs only.

A maximum of a 50-watt CFL bulb is recommended per socket.

To install a light bulb into a light socket, ﬁrmly grasp the base of

the bulb and insert it into the bulb socket. Gently rotate the bulb

clockwise until secure.

NOTE: The ﬁxture will only accommodate up to two 105-watt

bulbs due to their size.

MOUNTING THE LIGHT TO A LIGHT STAND

1. On the bottom of the ﬁxture,

loosen the locking mount knob

and insert it onto the light stand

mount.

2. Secure the ﬁxture by tightening

the locking mount knob.

3. To adjust the tilt angle of the

ﬁxture, hold the handle on the

back of the light and loosen the

locking tilt knob. Once the unit

has been placed in the desired

position, secure the ﬁxture by

tightening the locking mount

knob.