User's Manual

4
INSTRUCTIONS
ASSEMBLING THE SOFTBOX
The Raya 32˝ Octa Softbox is directly compatible for use with the
Raya Octa Fluorescent 7 Socket Fixture. Before attaching the two
items, make sure all lamps are removed from the fixture and that
it is not plugged into a power source. Also remove the fixture from
any mounted peripheral.
1
Remove the softbox from
the carrying case and
unfold it.
2
Take the light fixture’s
power cord and run
it through the hole
in the middle of the
softbox from the inside
(reflective silver surface)
out.
3
Tilt the light fixture to
allow its mount and
locking knobs through
the hole. Then position
the back of the light
fixture into the middle
hole of the softbox.
4
Fit the elastic ring of the
softbox around the back
of the fixture.