User guide

5
There are four possible states for the Mode Light:
1. OFF – Power Switch is OFF OR the Battery is completely
discharged in the event the Power Switch is ON and the AC
Adapter is disconnected.
2. STEADY GLOW – Power Switch is OFF with the AC adapter
connected, indicates fully charged battery.
STEADY GLOW – Power Switch ON; AC Adapter dis-
connected (not connected) and TV input connected to Ray and
Ray is displaying the TV image.
3. SLOW FLASH (once per second) – Indicates battery charging
with Power Switch OFF and the AC Adapter connected.
4. FAST FLASH (Two times the slow flash rate) – Power Switch is
ON and no TV signal detected. Ray must detect a TV signal on
the input in order to operate properly.
IMPORTANT
In the event Ray’s battery discharges during a video, the screen
will go blank and the Mode Light will change from STEADY
GLOW to a RAPID FLASH. Insert the USB Power Adapter and
the video will continue.
Connect the USB Power Adapter to the Ray Pico Projector to charge
the battery and view videos. The Mode Light will start flashing once
every second (60 flashes per minute) indicating the AC Adapter is
connected to the Pico Projector.
USB Power
AC Adapter