User guide

16
Troubleshooting Ray.
Easy way to check Ray’s operation
Connect Ray to a DVD player using the RCA Cable by connecting the
YELLOW RCA plug to the YELLOW Video Out Receptacle on the DVD
Player. Power the DVD player and Ray on. Ray will display the DVD
screen or video the same way it would display on a TV.
In the event Ray does not display a picture, verify connectors are
tightly attached and the power light is flashing. If Ray still does not
project an image, return Ray if in warranty, or send in to Ray
Displays for repair.
Apple 3G and 3Gs iPhone does not work with Ray .
Apple has embedded an authorization circuit device in their
connectors and licenses the device to third parties for incorporation in
their Apple authorized accessories. This device is read by the iPhone
and enables the TV out feature to work.
Verify the iPhone setting are correct for Ray operation.
Select the setting and then select iPOD
Scroll to TV Out and verify:
Wide screen OFF
TV Signal NTSC
Connect Ray to the iPhone using the iPhone Composite Video Cable
(Three RCA Plugs RED, WHITE and YELLOW) to the Ray RCA
Cable connecting the corresponding color via the RCA Adapter (see
Page 6).
Select your video out of the iPod menu and the image is projected
from Ray. In the event Ray does not project an image and you have
checked Ray’s operation using the ―Easy way to check Ray’s
operation” troubleshooting guide, then your iPhone TV Out is