User guide

12
Additional Safety Information:
Ray projects video through a lens on to a screen using LED light
sources. The closer an object is to the lens of the Ray, the brighter
the image/light emitted from the lens.
A properly connected Ray will output an image through the lens. To
verify an image, hold the Ray 6 inches from a light colored surface.
Ray Projector Longevity:
To prolong the life of the Ray Projector avoid operating on a flat
surface. Use the tripod or an equivalent to allow air circulation around
the Ray to cool the projector when overheated. The Ray may emit a
sound if the internal fan is not operating/ventilating properly. This is a
signal to turn the projector off.
Important Maintenance/Operating Information:
Carrying Ray:
The Ray Projector contains optical and other sensitive components.
Do not bend, drop, puncture or crush Ray .
Using connectors and ports:
Do not force a connector into a port. Before connecting carefully
check the port for obstructions. If the connector and port don’t join
with reasonable ease, they don’t match. Make sure the connector
matches the port and is correctly positioned in relation to the port.
Climate Control:
For optimum results operate Ray in an environment with a
temperature reading between 0º and 35º C (32º to 95º F). The
projector’s playing time might temporarily shorten in cooler
temperature conditions.