User guide

9
Charging Ray
For best long term results always start with a fully charged Ray.
 Turn the Power Switch to OFF.
 Connect Ray to the AC Adapter.
 Plug the AC adapter into an electric outlet.
 When the MODE Light flashes once per second the Ray is being
charged.
 Ray’s dead battery will be fully charged in 4 hours.
 The Mode Light stops flashing when Ray’s battery is fully charged.
Steady Mode light indicates a fully charged Ray.
Caution:
Use only the AC Adapter included with The Ray Projector.
Specifications
Display Technology
LCoS Technology
Light Source
LED
Resolution
VGA 640 x 480
Brightness( Typical)
7-10 Lumens
Frame Rate
60Hz
Color
24-bit RGB
Image Size (Diagonal)
5” at 8” / 73” at 9½’
Projection Distance
8” to infinite
Uniformity
90%
Focus
Manual Focus
I/O Connection
TV Composite Video
Speaker
Stereo
Weight
5 oz
Dimensions
(W x D x H) 2¹/3” x 4½” x ¾”
60 x 113 x 18 mm
Power Supply
Rechargeable Li-ion Battery
Battery Life
Up to 2 hours