Phau Ntawv Qhia

UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
04
|
1
2
8
9
10
3
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all
parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
4
PACKAGE CONTENT
1 Blade Set of 3
Blade Support Plates2
Hanging Bracket
3
Ceiling Canopy and Trim Ring
4
5
6
7
8
9
10
12
13
14
15
Downrod Asm.
Yoke Cover
Metal Cover (for no light use)
Fan Housing with Rope Assembly
Adapter Plate A
XX=FAN FINISH
5
6
7
11
12
13
14
15
LED Assembly 16W
Adapter Plate B (for no light use)
Glass Shade
Bracket Mounting Hardware
(wood screws, screws, lock
washers, star washers, flat washers,
wire nuts),
Blade to Motor Screws
w/Fiber Washers,
Balance Kit,
Safety cable hardware
(wood screw, flat washer)
11
Hardware Bag
Receiver Incl. 5 Wire Nuts
DR94014Fxx
YC900752Fxx
CA900752Fxx
x
x
x
x
Cradle A, Wall Plate, Face Plate,
2 Mounting Screws,
Wall Control w/2032 Battery,
Cradle B (for flat wall use only)
+
980014FWH-R