User manual

3. Setting Up Ethernet / WLAN Client

3.3 Checking Connection with the Access

Point

You can use the PING command to verify whether or not the

Ethernet/Wireless client can communicate with the device.

1. Open the DOS command window.

•

For Windows 98/Me: Start > Run. Type command and

click OK.

•

For Windows 2000/XP: Start > Run. Type cmd and click

OK.

2. Type the ping command and enter the IP address of the

Wireless Broadband Router. The factory default value is:

192.168.1.1. If you have changed the IP of the device, then

type the new IP address of the Wireless Broadband Router.

For example: C:\ping 192.168.1.1