User manual

3. Setting Up Ethernet / WLAN Client

For Windows 2000/XP

Step 1 Click on the Start menu, point to Settings and click on

Control Panel.

Step 2 Double-click the Network and Dial-up Connections or

Network Connections icon.

Step 3 Right-click the Local Area Connection icon for your NIC

or wireless adapter and then click Properties.

Step 4 On the General tab, highlight Internet Protocol (TCP/IP)

and then click Properties.

Step 5 When the following screen appears, select Use the

following IP address and enter these settings:

•

IP address: 192.168.1.x (x is between 2 and 254)

•

Subnet mask: 255.255.255.0