User manual

54Mbps Wireless Access Point User Manual
6
LED Color Status Description
Solid Ethernet connection is established.
Amber - 100 Mbps Ethernet
connection.
Green - 10 Mbps Ethernet
connection.
Blinking Transmitting/receiving packets on the
LAN port.
Rear Panel and Connector
The following figure illustrates the rear panel of your 54Mbps
Wireless Access Point.
Figure 2-2 Rear Panel and Connector
•
DC 5V: Power connector
•
LAN: 10/100BaseT LAN port of RJ-45 connector.
Connects to a hub, switch or NIC-equipped PC in your
network. The LAN port supports Auto-MDIX feature; it
works with either a straight-through or crossover cable.
•
reset: Dual-function button
 Reboot. Insert a straightened paperclip into the reset
hole to press the button. This will reboot the Wireless
Broadband Router.

Restore to the factory defaults. Insert a straightened
paperclip into the reset hole to press the button. Keep
pressing and power cycle (off and on) the device.
Wait for at least 5 seconds to release the button.
Then wait for the device to finish booting. This
operation
erases all previous settings entered by
the administrator.