Specifications

M7 GX Technical Manual 54 Raveon Technologies Corp.
5. Generate an RF signal on-channel with a level of -110dBm. Verify the
Power/BUSY LED stays on. If it does not, repeat step 4, adjusting in increments
of 10.
Busy-Channel Lock Out
If your system operation require the RV-M7 modem to monitor-before-transmit, of if
you do not want the RV-M7 to transmit on a channel that is busy, you can enable
“Busy-Channel-Lockout”, using the ATBC 1 command. ATBC 0 disables BCL, and
thus the modem will transmit whenever it has data to send out.