Specifications

M7 GX Technical Manual 30 Raveon Technologies Corp.
3 151.940 MHz
4 154.570 MHz
5 154.600 MHz
6.2. GPS Operation Mode Configuration
The GPS x command is provided to make configuring the RV-M7 simple to setup
for common configurations. The following table summarizes the various standard
configurations. Choose the configuration that is most similar to your usage, and
execute the appropriate GPS x command.
See Section 3 for a complete list of the various GPS modes.
To review the overall configuration of the GPS features of the RV-M7 GX radio,
type GX when in the command mode. A listing of the GPS features will be
displayed. An example listing of a RV-M7 GX in GPS mode 2 is shown below:
-GX GPS mode : 2 RavTrack PC
Serial Protocol : Raveon $PRAVE
Serial port baud rate: 38400 N 1
Position TX Interval : 60seconds (will TX when still.)
Proximity Alert : OFF
External Triggers : OFF
Speed limit trigger : 0 (OFF)
TX method : 1 (Time Slot)
mS per TDMA slot : 200 4 X 50mS ticks
TDMA slot number : 4
TDMA frame time : 2
Waypoint Prefix : V
Security key is enabled.
OK
After the GPS x command is executed, the operation of the unit may be
customized for special applications. The following table summarizes the
parameters that may be modified, AFTER the GPS x command.