Specifications

Version C15. February 2013 Raveon Technologies Corporation
Company Confidential
16
RS232 serial cable for –WX version
The RS232 serial cable uses at Hirose connector, part number HR30-6P-6S(71).
5. Configuring the RV-M7 GX
5.1. Overview
The RS232 serial port on the unit is used to send and receive data over the air, as
well as to configure the RF modem. In normal operation, the user sends serial data
into the TxD pin of the user port, and this data is transmitted over the air. Received
data from another RF modem is output to the user via the RxD pin of the user port.
This is the default operating condition of the RF modem. No special characters,
hardware control lines, or timing is required to operate the RV-M7 modem.