User manual

C H A P T E R 5 - N L 9 0 0 P R O S E T T I N G S 14
Note: The Show Defaults button can be used to display the default Radio settings.
DESIGN TIP
The Raveon Technologies Configuration utility automatically programs the mode (point-to-point
or point- to-multipoint) based on the radio’s current settings:
1 If the Destination Address field is set to any value other than FF FF FF FF FF FF, the
radio will send data only to the radio whose MAC matches that specified in the
Destination Address field (point-to-point).
2 If the Destination Address field is set to FF FF FF FF FF FF on a client radio, it will be set
to auto destination mode & transmit to the radio whom it last received a packet from.
3 If the Destination Address field is set to FF FF FF FF FF FF on a server radio, it will be
set to Broadcast mode & transmit to all available clients (point-to-multipoint).