Specifications

Company Confidential 49 Raveon Technologies Corp.
carrier when the RF carrier is above the threshold set with the ATRA
command.
5. Generate an RF signal on-channel with a level of -110dBm. Verify the
Power/BUSY LED stays on. If it does not, repeat step 4, adjusting in
increments of 10.
10.8. MURS Operation
When this product is used on frequencies governed by the FCC rules part 95,
Subpart J, (Multiple Use Radio Service operation), it must be configured using
the special MURS command. When in the command mode, enter the command
MURS 1. This programs all channels to the MURS channels, and locks-out the
ability to re-program the channels to any other frequency. The MURS channels
are:
1 151.820 MHz
2 151.880 MHz
3 151.940 MHz
4 154.570 MHz
5 154.600 MHz
6 151.820 MHz