Installation guide

FireLine System Protocol Manual 8 Raveon Technologies Corp.
Using the Digi Device Setup Wizard is the preferred method of assigning an IP
address and initially configuring your Digi Connect device. The Digi Device Setup
Wizard is supplied on the CD that accompanies your Digi Connect device.
The Digi Device Setup Wizard “discovers” the device, and then provides a
method for assigning an IP address as well as configuring your device for your
needs. It can be used in conjunction with the web interface to ‘tweak’ the specific
environment. Setup is specially designed for the Windows environments, and is
quick, automated, and complete.
Prerequisites
This procedure assumes the following:
• The FireLine Ethernet device is connected to the network and powered up.
• The CD will be used on a system running Microsoft Windows operating system
• or a Unix operating system.
• That you have located the device server’s MAC address, located on the label on
• the bottom of the product, and recorded it for later use in assigning an IP
• address.
Procedure
1. Insert the Digi CD in the CD drive.
2. If the CD does not start automatically, double-click My Computer > CD
ROM Drive > setup.exe
3. The Digi Device Setup Wizard will automatically pop up. Select your
platform and click Next.
4. The Digi application finds and lists all of the Digi devices on your network.
5. Locate your device server by its MAC address.
6. Select the device server and then click Next.
7. Follow the instructions in the wizard to configure your Digi Connect device.
The default user is:
root The default password is: dbps Use the online
help supplied with the wizard if you need more information about values
the wizard prompts you to supply and select.
The main configure menu for setting the IP address in the FireLine Ethernet will
look like the screen snapshot below. In this example, the FireLine Ethernet is
configured with a static IP address.