User's Manual

Company Confidential 24 Raveon Technologies Corp.
3. Verify the DC center of the demodulated data is stable. The random data
should be randomly timed 1s and 0s, and have little to no AC component
on them. See pictures below for details.
4. If necessary, change the ATR9 setting so that the long data bit have the
same amplitude and DC value as the shorter ones.
5. On the low end of the band, adjust ATRL so that the modulation is proper.
6. On the high end of the bamd, adjust ATRH so that the modulation is
proper.