Quick Reference Guide Envizio Pro™
Overview The Envizio Pro console is an all-in-one field computer capable of providing product control for up to two products, supplying GPS information to other in-cab devices, and providing on-screen guidance during field applications. All of these features may be controlled at the same time with an easy to use touch screen.
Home Screen Touch anywhere it appears to return to the Home screen. Touch the: Start Job icon to begin a new job or resume an existing job. Tools icon to access the Tools Menu. The Tools Menu contains the settings and calibrations for the Envizio Pro system. Shutdown icon to power down the Envizio Pro console. The Shutdown icon only appears when a job is not in progress. Be sure to shutdown the console before switching the console off. End Job icon to close a job in progress.
Wireless Communications Status The current status of wireless communication is displayed along the top of the Home screen display. This icon will appear: Gray if no wireless communications device is connected to the Envizio Pro console. Green if communication is okay. Yellow if an error condition has been encountered. Red if wireless communication is not available. Touch the shield icon to display the Wireless Status screen.
To Retry the CANbus Connection: If the Envizio Pro does not recognize CAN nodes when the console is first powered up, the CANbus connection may need to be restarted. 1. From the Home screen, touch 2. When prompted, touch the to confirm and retry CANbus communication. If CANbus communication is not re-established, refer to the Envizio Pro Installation & Operation Manual for troubleshooting information and assistance.
2. If the USB flash drive has not been previously used with the Envizio Pro, touch the Create File Structure on USB Drive button. 3. Select the type of files on which to perfom file maintenance. For example, touch the Job File option to transfer completed job files from the Envizio Pro to a connected USB drive. 4. Select the action to perform on the selected file type to display a list of the available files.
GPS Use the GPS menu to adjust the internal GPS receiver or to enable the Envizio Pro to receive DGPS from an external receiver. The GPS menu also contains screens to review the status of GPS reception, set message outputs (for the internal DGPS receiver only), or select the PRN (Pseudo-Random Number). To Setup GPS Message Outputs: 1.
5. Touch the Pattern button to select one of the available Guidance patterns for the job: Enhanced Straight Fixed Pivot Last Pass (A-B) Line Contour 6. If the optional AccuBoom™ feature will be used, touch the AccuBoom button to enable the feature. To create or load a spray zone map, select the ‘Use Spray Zone Map’ option. 7. Touch the Product 1 or Product 2 buttons to select the control mode and set the target application rate for the job.
2. The Tank or Bin Indicator displays the calculated volume of product remaining in the tank or bin. Touch this indicator to display the Tank or Bin Volume Configuration screen. 3. The Area Covered displays a tally of the total area covered by active sections (sections toggled on) within the current job. 4. The GPS Status status indicator is displayed on the Guidance screen. See the GPS Status Indicator section on page 2 for more information. 5.
Menu Touch the Menu icon on the Guidance screen to access additional tools and features of the Envizio Pro. The Menu also offers access to the Envizio Pro Home screen. The following tools and features may not be accessible at the same time. Be sure to read the descriptions and ensure appropriate information is displayed on-screen to allow access to the following features and tools.
Select the Reset A-B Line icon to clear the displayed path. If the displayed path will need to be recalled in the future, be sure to save the current path before selecting reset. Touch the Save A-B Line icon to save the displayed path. Once saved, an A-B Line can be recalled at any time or loaded into other jobs. In addition, saved paths can be transferred from the Envizio Pro via the File Maintenance feature.
Touch the Delete Boundary icon to reset the current Field Boundary. A field boundary must be present in the current job or this icon will not appear in the Menu. Touch the Record Field Boundary icon to begin recording a New Field Boundary. While a Field Boundary is being recorded, the Pause and End Field Boundary icons are displayed on the Guidance screen. AccuBoom™ The following sections offer an overview of the optional Raven AccuBoom™ system when used with the Envizio Pro console.
2. Touch: Menu Spray Zone Tools Load Spray Zone Map 3. Select the name of the desired Spray Zone Map from the list and touch load the map. to To Edit the Spray Zone Map: 1. Begin an AccuBoom™ enabled job with the Use Spray Zone Map option enabled (refer to the Start a Job section earlier in this guide). 2. Touch: Spray Menu Zone Tools 3. Select the following icons to begin recording a: No-Spray Spray Field Zone Zone Boundary 4. Select the reference point of the vehicle and then touch the icon. 5.
AutoBoom™ The following sections offer an overview of setting up and using an optional Glide Series AutoBoom™ system with the Envizio Pro. Refer to the AutoBoom Calibration & Operation manual for detailed setup and calibration information regarding the AutoBoom™ system. To view the Glide Series AutoBoom settings and to enable automatic boom height control, touch , then and to access the Glide Series AutoBoom setup screens. Enabling AutoBoom While Staring a Job 1.
Operation During a job, the AutoBoom™ Status Indicator will be displayed on the Envizio Pro Guidance screen. This area may display the following indicators for the current status of the AutoBoom™ system: or Left/Right Center Rack Enabled Enabled Status of the center rack is only displayed if a Glide Series AutoBoom system capable of controlling the center section is connected to the Envizio Pro console. Touch the displayed status icon to access the Glide Series AutoBoom™ Calibration screen.
Envizio Pro™ Quick Reference Guide (P/N 016-0171-149 Rev C 12/09) Raven Industries Applied Technology Division P.O. Box 5107 Sioux Falls, SD 57117-5107 Toll Free (U.S. and Canada): (800)-243-5435 or Outside the U.S. :1 605-575-0722 Fax: 605-331-0426 www.ravenprecision.com atdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under copyright laws.
