User Manual

6 Prodigy™ Wi-Fi Bridge Setup / Operation Guide 993011XX
Prodigy™ Wi-Fi Bridge Receiver Installation
STEP 3
Insert the power cord into the Prodigy™ Wi-Fi Bridge receiver,
then plug into electrical power source (electrical surge
protection device recommended, not included) (FIGURE 3).
LEARN
BUTTON
TRANSMISSION
LIGHT
POWER
DOWN BOX
ACTIVATE
BUTTON
TRANSMISSION
LIGHT
ELECTRICAL
POWER CORD
WI-FI BRIDGE
RECEIVER
FIGURE 3: Prodigy™ Wi-Fi Bridge receiver power cord installation
and activation button location.
FIGURE 4: Power down box learn button location.
STEP 4
Press the activate button on the Prodigy™ Wi-Fi Bridge receiver for (1)
second, then press the learn button on the Prodigy™ adjustable base
power down box for (1) second (FIGURES 3 and 4). The transmission
light on both receiver boxes will flash on-and-off in succession
indicating communication. NOTE: The Prodigy™ Wi-Fi Bridge receiver
must be in the same general location as the power down box.