User Manual

Prodigy™ Owners Manual 99301XXX

INSTALLATION

FIGURE 3: Foot mattress retainer installation. Side retainer

installs in same manner.

FIGURE 4: Mattress retainers installed.

Note: if adjustable bed is to be set up

without a headboard, basic installation

is now complete. If headboard is to be

installed, proceed to Headboard Bracket

Installation.

FAILURE TO FOLLOW HEADBOARD

BRACKET INSTALLATION INSTRUCTIONS

MAY CAUSE HEADBOARD BRACKET

INTERFERENCE WITH BASE FOAM DURING

ADJUSTABLE BED OPERATION. BASE FOAM

OR BASE COVER DAMAGE COULD RESULT.

NOTE

3 inches MAX.

FIGURE 5: headboard cross member location must not

exceed 3 inches (76.2mm) from the top of the mattress.

10. Install headboard brackets to the bed

base frame. When attaching (2) twin size

units to a king size headboard an optional

swing hinge kit (see accessory section)

may be used to connect the twin units.

Note: it is important to position the

bottom of the headboard cross member

a maximum distance of 3 inches

(76.2mm) between the headboard and

the top of the mattress (FIGURE 5). Do

not exceed 3 inches (76.2mm).

b. Place mattress retainer ends into

grommeted holes in top surface of

adjustable bed base (FIGURES 3

and 4). Note: king size will use only

(2) side retainers around outside

perimeter.

FOOT

MATTRESS

RETAINER

FOOT END OF BED BASE