User Manual

Prodigy™ Owners Manual 99301XXX
7
*4 inch and 7 inch legs may be used separately or in
combination with casters to raise bed base to varying
heights off the floor:
• 4 inch leg only = 4 inch bed height
• 4 inch leg w/caster = 6-1/2 inch bed height
• 7 inch leg only = 7 inch bed height
• 7 inch leg w/caster = 9-1/2 inch bed height
For installation and setup, complete the numbered procedure indicated below and on
the following pages:
INSTALLATION
LOCKING
LEG CASTER
(4 PIECES)
HEADBOARD BRACKET ASSEMBLIES
Queen size shown—twin size (or smaller)
headboard brackets are not equipped with
angle brace. (4 pieces, 2 assemblies)
HEADBOARD BRACKET
HARDWARE KIT
(hardware: 16 pieces)
4” LEG
(4 PIECES)
7” LEG
(4 PIECES)
FOOT
MATTRESS
RETAINER
(1 per base)
SIDE MATTRESS
RETAINER
(2 per base)
HAND CONTROL
ANGLE BRACE
1. Before discarding any packing materials,
check the adjustable bed shipping carton
and verify the following items are
included:
• (1) Foot Mattress Retainer
(per base)
• (2) Side Mattress Retainers (per base)
• (4) 4 inch Bed Legs*
• (4) 7 inch Bed Legs*
• (4) Locking Leg Casters
• (2) Headboard Bracket Assemblies
• (1) Headboard Bracket Hardware Kit
• (1) Hand Control
• (1) Owners Manual
• (1) Registration Card