Installation guide

45
© 2003 directed electronics, inc.
ffeeaattuurree ddeessccrriippttiioonnss
1
AACCTTIIVVEE//PPAASSSSIIVVEE AARRMMIINNGG::
When active arming is selected,
the system will only arm when the transmitter is used. When set
to passive, the system will arm automatically 30 seconds after the
last door is closed. Passive arming is indicated by the rapid flash-
ing of the LED when the last protected entry point is closed.
22 CCOONNFFIIRRMMAATTIIOONN CCHHIIRRPPSS OONN//OOFFFF::
This feature controls
the chirps that confirm the arming and disarming of the system.
33 IIGGNNIITTIIOONN CCOONNTTRROOLLLLEEDD DDOOOORR LLOOCCKKSS OONN//OOFFFF::
When turned on, the doors will lock three seconds after the igni-
tion is turned on and unlock when the ignition is turned off.
44 AACCTTIIVVEE//PPAASSSSIIVVEE LLOOCCKKIINNGG::
If passive arming is selected in
Feature 1, then the system can be programmed to either lock the
doors when passive arming occurs, or only lock the doors when
the system is armed with the transmitter. Active locking means
the system will not lock the doors when it passively arms. Passive
locking means that the system will lock the doors when it
passively arms.