Manualshelf

Data Sheet

ManualsBrandsRatRig ManualsBrushless DC Motor ControllersRatRig V-Motion Lite Upgrade Kit wo/ Motor
12345678910
V-MOTION LITE - User Guide
8
10. Carefully loop the Belt around the toothed pulley of the motor, keeping tension.
11. Slide the tip of the Belt through the gap between the rail and the opposite wheel of the
carriage.
12. Pick up the tip of the Belt on the opposite side and slide it behind the other T-Nut, which
should be placed near the end of the rail. Pull from the opposite side until the belt is
snug against the rail.
13. Screw the remaining Knob on the T-Nut. Right before it locks in place, the knob will start
biting the belt. When this happens, you can fine-tune the tension on the belt by moving
the T-Nut slightly to the left or right.
14. Finish screwing the Knob to lock the T-Nut in place.
15. Cut off the remaining length of the Belt. You’re done!