User`s guide

6
2)Make sure that the SCSI device has a SCSI ID except 7. You can usually
change a SCSI ID with a switch on the back of the SCSI device. For more
information, refer to the SCSI device manual.
3)Attach an external active terminator to the SCSI device, as Fig.3 shows.
If the SCSI device has an internal terminator and the switch, set it on
state instead of attaching the external active terminator. Refer to the SCSI
device manual if you are not sure how to terminate the SCSI device.
4)Make sure the SCSI device has Term-Power output capability.
If the SCSI device doesn’t have this capability, you must use an
OPTIONAL AC Adapter(sold separately). Refer to Chapter 5-4 and 7.
Next, you must connect the FR1SX to a PC or Mac.
If you use a PC, proceed to Chapter 2-2.
If you use a Mac, proceed to Chapter 2-3.