User`s guide

Macintosh

[SIM Driver mode] This setting is usually checked(Enalbed). This item is

only for MacOS 9.x.

[Speed] Default value is 20MB/s.You can set Max transfer rate from 20, 10

,5MB/s, Async.

[Parity check]

Default value is enabled. You can set parity check enable or disable.

[FireREX1/FR1SX SCSI ID] FR1SX SCSI ID is No. 7.

[SCSI bus reset]

Default value is enabled.You can set whether the FR1SX issues SCSI bus

reset to a SCSI device or not.

[Target SCSI ID.]

Default value is AUTO. You can set target SCSI ID No.

[Enable START/STOP UNIT command]

Default value is disabled. You have to enable START UNIT command for

some SCSI devices which will not work if they does not receive this START

UNIT command.