User`s guide

Macintosh

B.How to configure the SCSI parameters

1)Start the FR1 utility as described at step 1-7 in chapter 4-2-2.

2)The main window shown in the next page will appear.

Refer to the next page for setting items information.

3)After changing your settings, click [Start Configuration setting].

4)After finishing the configuration settings, the following window will appear.

Click [OK].

With this firmware update utility, you can configure settings for the SCSI

device

5)Click [Disable FR1 Utility] on the main window.

6)The following window will appear. Type in an administration password.

Then, click [OK].

7)You will be prompted to restart your system.Click [OK].