User`s guide

Macintosh

3)Select [Config Utility] from the [File] menu. The window shown in the

next page will appear. For setting information, refer to the next page.

4)After configuring the SCSI parameter, change selected set from [FIREREX

CONFIGURATION ] to the previous settings you used before with the

[Extensions Manager]. Then, restart your Mac.

1)Before starting this utility, make sure the following points:

a.Open [Extensions Manager] and make sure selected set is [FIREREX1

CONFIGURATION] as described in Chapter 4-2-1.

b.Make sure the following two driver is enabled with [Extensions Manager].

-FireREX1APIDriver / FireREXLoaderDriver

c.Make sure the following two driver is disabled with [Extensions Manager].

-Authoring Support / FireWire Authoring Support/Disc Burner Extention

d.Don’t connect any1394 devices/repeaters to a PC/the FR1SX directly or

in between.

2)Open the [FRUTY] folder and start [FR1 Utility].The following window

will appear. Click [OK].

B.How to configure the SCSI parameters