User`s guide

Windows

4-1-2.FR Configuration Utility

With this FR Configuration utility, you can configure settings for the SCSI

device or update the old firmware data.

(NOTE)

Don’t connect any1394 devices/repeaters to a PC/the FR1SX directly or

in between.

1)From the [Start] menu, select [Programs], then [RATOC FireWire

Utility], and then [FR Configuration].

2)The message box saying “reconnect the 1394 cable” will appear. Follow the

message instruction.

3)When you start the FR Configuration on Windows 2000 for the first time,

hardware wizard will appear. Just continue by clicking [Next] and click

[Finish] at the last window. Then, restart your PC. After your PC

restarting, start the FR Configuration again.

4)Make sure the [Setting was successful] message appears as shown in the

next page.