User`s guide

Macintosh
13
This B’sCrew SIM driver has the following restrictions:
(1)The SIM Driver mode on FR1SX firmware operating mode must be set
enable(Default setting is enable). You can set or reset this mode with the
SCSI Configuration utility. Refer to section B in the Chapter 4-2-1.
(2)The SIM driver doesn’t support FireWire Plug and Play, Hot Swapping
because the original SCSI API doesn’t include these features.
(3)As the SIM driver hooks the standard SCSI APIs for Add-on SCSI ports
and substitute for FireWire API, some SCSI applications or drivers which
dedicates for the embedded SCSI port or doesn’t call standard SCSI API
will not work properly.
(4)The B’sCrew SIM driver has some compatibility issues with SCSI devices.
Please refer to our compatibility list on our web site before using it.
(5)The SIM driver doesn’t support system boot from a SCSI device connected
to the FR1SX.
Follow the steps through to install this B’sCrew SIM driver.
(1)Insert the bundled CD-ROM and start [B’sCrew SIM Driver Installer] in
the [B’sCrew SIM Driver] folder.
(2)Note and tips will appear. Click [Continue].
(3)Make sure the install location on the screen. Click [Install].
(4)Message screen will appear. Click [Conitnue].
(5)Message screen saying install was successful will appear. Click [Restart].