User`s guide

Macintosh
11
2-3.Connecting the FR1SX to a Mac
You can now hot plug in the FR1SX to a Mac’s available FireWire port.
Follow the steps through:
1)If Mac is powered down, start it now.
2)Connect the FR1SX to the FireWire port via the FireWire cable, as Fig.5
shows.
3)Power up your SCSI device. Make sure the FR1SX’s Power LED comes on.
If the LED doesn’t come on, refer to Chapter 5-4.
4)If you attached a storage SCSI device to the FR1SX and its icon mounted on
the desktop, you have successfully installed the FR1SX.
If the driver/application of your SCSI device has only SCSI API and you
want to use them on Mac OS 9.x, you need to install B’sCrew SIM driver.
In order to install the B’sCrew SIM driver, proceed to Chapter 2-4.
FireWire port
FireWire cable
Fig. 5