User`s guide

Windows

3)Power up your SCSI device. Make sure the FR1SX’s Power LED comes on.

If the LED doesn’t come on, refer to Chapter 5-4.

4)If a new drive is assigned at My Computer, as shown below, you have

successfully installed the FR1SX.

When you want to remove it from the PC, you must click the hardware

removable icon at the TaskBar as shown below and select [Stop xxx-

Disk(X:)]. You will see the message box saying “you can safely remove the

device”. Click [OK]. You can now remove it.

NOTE

If a new drive letter isn’t present, refer to Chapter 5-3.

If you use a Windows 98 SE, proceed to next page to install the update

program. If you don’t install it, the hardware removable icon don’t appear at

the TaskBar.