User`s manual

2-1

Before using the unit

2. Before using the unit

2.1 Inspection after unpacking

2.1.1 Checking the product

After unpacking, take out the robot driver and check the following items.

If you find or suspect any damage to the product please contact our sales office or sales

representative.

(1) Make sure that there is no damage, missing parts or dents/scratches on the product

body.

(2) After unpacking, make sure that the package contains the following items.

Item Qty Note

1) Robot driver 1

2) Control power supply connector 1

Supplied with a wire inserter tool and

B1-B2 shorting bar.

3) Connector plug 1

For detailed information, refer to 3.2.4,

"Input/output signal wiring", in Chapter 3.

4) Connector cover non-shielded shell kit 1

(3) Check the specification label to find whether the product is the same item as ordered.

RDX

882 Soude, Naka-ku, Hamamatsu, Shizuoka 435-0054, Japan

Specification label

Serial number label

Specification label position

Robot driver model name

Maximum output for

applicable motor

Input rating

Output rating

Details on specification label

1) 2)