User`s manual

Parameter description
6
6-4
6. Parameter description
(3) Special display
A special display appears to indicate the robot driver status as shown in the following
table.
Display Description
Voltage is too low during servo-off. (Control power supply)
No alarm log is stored.
User initialization in-progress. (LED segments within the leftmost
digit light in sequence.)
Log initialization in-progress. (LED segments within the leftmost
digit light in sequence.
Sample display: When setting Fb-14, Fb-16 or Fb-18 to a value
between –10000 and –19999.
Display at left shows a parameter value of –11491.
(A minus sign "-" is appended to the leftmost digit "1" in order to
indicate a 6-digit number including a sign.)
<To set Fb-14, Fb-16 and Fb-18:>
As the basic method, use the
key to select the digit you want
to change and then use the or key to set the desired
value. Note that the leftmost digit is displayed as follows:
Press the
SET
key when the desired value is displayed.