User`s manual

6-3
6
Parameter description
6. Parameter description
(2) Operating the trip monitor and the trip log monitor
The button marks over/under the right/left arrows (
) or at the side of the up/down
arrows (
) show that those buttons were pressed.
…
…
FUNC
FUNC
FUNC
FUNC
Speed command
Speed detection value
DC bus voltage
Input terminal
Output terminal
Shows the same
information as above "d-11".
Note 2)
Note 2)
Note 1)
Current
This indicates no alarm log is stored.
Note 1: The number at the right of the alarm code shows the alarm log number.
The number "1" is the newest data. The larger the log number the older the
log. For more information refer to 9.1, "Alarm display (alarm log)".
Note 2: A period ( . ) in the last digit indicates the following information.
Period Displayed information Remarks
No Speed command
Two speed data items (speed command and
speed detection value) are used and can be
identified by the period on the trip monitor.
Yes Speed detection value