User`s manual

5-3
5
Appendix
5. Appendix
5.2.1 Connection procedures and precautions
(1) Installing the PC card
Install the PC card by following the instructions in the manual that came supplied with
it. At this time, be sure to note which COM port the PC card RS-232C is assigned to.
(2) Connecting the TOP software
When you first start the TOP software after installing it, the communication port is set
to COM 1, so change it to the above-noted COM port and make the connection as
explained below. (The following example assumes that the PC card RS-232C is
assigned to COM2.)
1. Start the TOP software.
2. Click the [Communication format] button.The "Communication format setting"
dialog box appears.
3. Set the communication port to COM2.
4. Click the [Setting] button.