User`s manual

Operating Procedures
3
3-24
3. Operating Procedures
(3) Hiding a graphed line
You can hide a graphed line by clearing the check box as described below. To
redisplay the graphed line, reselect the check box by placing a check mark.
Click this check box to show or hide the graphed line.
(4) Clearing the graphs in the window
To erase the graphs displayed in the window, select "Clear display" from the "Trace
operation" menu or click
on the toolbar.
You can use the following toolbar buttons to erase all graphs or each graph displayed
in the window.
Click to erase all graphs. Click to erase each graph.
Click to erase each graph.