User`s manual

3-13
3
Operating Procedures
3. Operating Procedures
3.3.5 Loading the parameters
Files saved as described in the preceding section can be loaded to set the parameters.
1. In the "Parameter setting" window, select "Open" from the "File" menu or click the
button on the toolbar.
2. Specify the location and name of the file to be load, then press the [OPEN (O)] button
to load the file.
Note: Only CSV files can be loaded.
3. After the parameters are loaded from the file, the parameter data appears in red if the
PC data does not match the robot driver data.
4. To change the robot driver parameter data, perform a parameter writing operation. For
this procedure, see section 3.3.3, "Changing the parameters".