User`s manual

Operating Procedures
3
3-12
3. Operating Procedures
3.3.4 Saving the parameters
The parameters can be saved and managed as files.
1. In the "Parameter setting" window, select "Save As" from the "File" menu or click the
button on the toolbar.
2. Specify the file save location and the file name, then press the [Save (S)] button to
save the data.
The file can be saved in either of the following two different formats:
CSV: Saves a file in comma-separated value format.
TXT: Saves a file in tab-separated value format.
(Files saved in TXT format cannot be read by TOP software.)
Note: Data saved by the above procedure is not robot driver data but PC data (data
displayed in "Setting value" column on the "Parameter setting" window). If
you save data without completing the write procedure, the saved data differs
from the data in the robot driver.