User`s manual

Operating Procedures
3
3-10
3. Operating Procedures
[Example 2] To change the electronic gear denominator (FA-13).
1. Select the [FA] tab, place the mouse pointer in the "Setting value" field for FA-13,
and enter a new setting.
Select the [FA] tab.
2. Verify that the "Setting Value" changes to red, and that an asterisk displays to its
right.
3. Select "Write" from the "Parameter" menu or click the button on the toolbar.
4. The following screen then displays. To proceed with the operation, click the [OK]
button.