User`s manual

3-5
3
Operating Procedures
3. Operating Procedures
3.2.2 Monitor display window description
The "Monitor display" window is described below.
Shows input terminal
status in real time
(0: OFF; 1: ON).
Shows output terminal
status in real time
(0: OFF; 1: ON).
Shows operation information
in real time.
Shows alarm log.
The larger the number,
the older the log.
Shows current operation status
such as "Stop", "Operating",
"Forward overtravel" and "Reverse overtravel".
(Note)
(Note)
(Note)
(Note)
(Note) (Note)
Note: Items shown here vary depending on which motor type is selected, as shown
in the table below.
When "Rotary Motor" is selected When "Linear Motor" is selected
Item name Unit Item name Unit
Speed command
min
-1
Speed command
mm/s
Speed detection value Speed detection value
Moment of inertia kg·m
×
10
-4
Detected mass on slider kg
×
10
Phase Z position pulses
Magnetic pole position
counter
dig