User`s manual

3-3

Operating Procedures

3. Operating Procedures

3.1.2 Exiting the TOP software

(1) To exit the TOP software

1. Close all open screens except the opening screen.

2. Click the [Disconnect] button if currently connected to the robot driver.

3. Click the [Exit] button on the opening screen.

[Exit] button

(2) To disconnect the communication

1. Close all open screens except the opening screen.

2. Click the [Disconnect] button on the opening screen.

[Disconnect] button

Note: The motor type cannot be changed as long as a screen (such as "Parameter

setting" screen) other than the opening screen is displayed. Close such that

screen if displayed.