Instruction manual

CONTENTS
1. Installing/Uninstalling the Software
1.1 Preinstallation Checkout....................................................................................................... 1-2
1.2 Installation Procedure........................................................................................................... 1-2
1.3 Uninstallation Procedure ...................................................................................................... 1-8
1.4 Upgrade Procedure .............................................................................................................. 1-9
2. Connecting to AD Series Servo Drive
2.1 Connection Cable ................................................................................................................. 2-2
2.2 Connecting to the Servo Drive ............................................................................................. 2-2
3. Operating Procedures
3.1 Launching and Exiting .......................................................................................................... 3-2
3.2 Monitoring Function .............................................................................................................. 3-4
3.3 Parameter Setup Function.................................................................................................... 3-6
3.4 Operation Trace Function................................................................................................... 3-17
3.5 Test Run and Adjustment Functions .................................................................................. 3-27
3.6 Changing the Communication Format................................................................................ 3-45
3.7 Setting Motor parameters................................................................................................... 3-46
4. Troubleshooting Guide
4.1 If the Servo Drive Cannot Be Connected ............................................................................. 4-2
4.2 If Parameters Cannot Be Written ......................................................................................... 4-2
4.3 If Parameters Cannot Be Read ............................................................................................ 4-2
4.4 If Parameter Initialization Does Not Work ............................................................................ 4-3
4.5 If the Operation Trace Function Does Not Properly Work ................................................... 4-3
5. Appendixes
5.1 Files to Be Copied to System ............................................................................................... 5-2
5.2 Connection to a Personal Computer without a Serial Port (RS-232C) ................................ 5-3