Instruction manual

CHAPTER 3 Operating Procedures
3 - 13
3.3.4 Saving the parameters
You can save the parameters in a file for parameter management purposes.
1- In the parameter setup window, choose [File (F)] on the menu bar and then choose
[Save As (S)], or click the mouse on
on the toolbar.
2- When the Save As window opens, specify the file name and save destination.
You can save the file in either of the following two different formats:
CSV: Saves the file in a comma-separated value form.
TXT: Saves the file in a tab-separated value form.
(AHF cannot read the file saved in TXT form.)
NOTE: The data saved in this manner is not the servo drive data but the personal
computer data (data displayed in the current value column). If you save the
data without completing the write procedure, the saved data differs from the
data in the servo drive.
With this function, you can create different data files beforehand without writing data
into the servo drive.