Instruction manual

CHAPTER 3 Operating Procedures
3 - 10
(Example 2) Editing Fb-00
1- Choose the Fb tab, click the mouse on the Fb-00 setting field, and enter a new
setting.
For
choosing Fb
Note 1) An error occurs on the screen when an attempt is made to rewrite write-
protected parameters while an operation is performed with the SON terminal
turned on.
Note 2) An error occurs on the screen when an attempt is made to write parameter
data that is outside the acceptable parameter range.
2- Verify that the newly entered setting is displayed in red.
The edited setting
appears in red.
3- Choose [Parameter (P)] on the menu bar and then choose [Write (W)], or click the
mouse on
on the toolbar.
4- When the following dialog box opens, choose [OK].