Instruction manual

Q IMPORTANT
Keep this instruction manual at a place near the software operating personnel.
Before installing, running, or otherwise using the software, be sure to thoroughly read this
instruction manual. Use the software properly in accordance with the knowledge of the machine,
safety instructions, precautions, operating instructions, and other handling procedures.
Always use the software without exceeding the specified limits stated in this instruction manual.
It is also essential that you perform proper inspection and other maintenance procedures to
prevent failures.
Q NOTICES
• The contents of this instruction manual are subject to change without prior notice.
• Carefully keep this instruction manual because it will not be reissued.
• No part of this instruction manual may be reproduced or reprinted without permission.
• Every precaution has been taken in the preparation of this instruction manual. However, if you
find any errors or omissions in this document or experience any doubt about the contents of
this document, contact your Hitachi representative.
• Notwithstanding the foregoing, Hitachi cannot be responsible for the results of the use of this
manual or product described in it.
• The AC Servo Drive Setup Software is copyrighted by Hitachi, Ltd. Hitachi, Ltd. holds the
copyright and all other rights to this software.
• The AC Servo Drive Setup Software is used to connect the Hitachi AC Servo Drive AD Series
to a personal computer. It does not operate independently. When operating a servo drive,
thoroughly read its instruction manual as well as this instruction manual for safety assurance.
• Windows, Windows NT, and Windows 2000 are trademarks of Microsoft Corporation in the
U.S.