User guide

31
Windows
7.Troubleshooting(Windows)
A)[Add New Hardware Wizard] will not appear when you connect CF03U to your PC for
the first time .
1.Make sure USB cable is connected correctly and firmly.Refer to page 13.
2.Make sure USB port is set ready.Refer to page 33.
3.Make sure USB port is enabled in your BIOS. Refer to the manual that accompanied your PC
for how to set USB port enabled in your BIOS.
B-1)[Removable Disk] icon will not appear in [My Computer].
B-2)Media Power lamp will not light up.
B-3)There is [
××
××
× ] mark,or [ ! ] mark in [Device Manager].
1.Make sure Compact Flash is inserted correctly.Refer to page 25.
2.Make sure USB cable is connected correctly and firmly.Refer to page 13.
3.Make sure the driver software for CF03U is installed properly.Refer to page 14.
4.Make sure USB port is set ready.Refer to page 33.
5.Make sure USB port is enabled in your BIOS. Refer to the manual that accompanied your PC
for how to set USB port enabled in your BIOS.
6.Make sure CF03U is set enable in [Device Manager]. Refer to page 42.