User`s guide

2-5.CFU1U HID Driver Set Up

In order to connect a HID(Human Interface Device) such as an USB keyboard,

USB bar code reader, you need to install the HID driver. Insert the bundled CD-

ROM into a CD-ROM drive. If you are a Pocket PC 2003 user,

open [PPC2003] - [HidDriver] - [English]. Then, run [SETUP].

If you are a Pocket PC 2002 user, open [PPC2002], and open your PDA maker

folder, and then [HidDriver] - [English]. Then, run [SETUP].

The following window will appear. Click [Yes] to install the driver.

When the installation has completed, the following window will appear.

Click [OK]. You need to reset your PDA to take effect.

Message on Windows PC

This message may be different, depending on your PDA