USB CF Host Card CFU1U User’s Guide Jan. 2003 Rev. 2.
CFU1U 1.Introduction................................................................... 1 1-1.Features .................................................................................. 1 1-2.Package Confirmation ........................................................... 2 1-3.System Requirements and Restrictions ................................ 2 1-4.USB Device Support ............................................................... 3 1-5.Before installation ................................................
1.Introduction This User’s Guide describes how to install, use the USB CF HOST Card CFU1U(called CFU1U in this User’s Guide). The information in the README file on the CD-ROM may include the latest information. Be sure to read the file as well. 1-1.Features •Just plug in the CFU1U into a CF slot and USB1.1 Host Interface will be available in a snap. •Runs on COMPAQ(HP) iPAQ series, Toshiba GENIO E series, Fujitsu POCKET LOOX series. •USB HID Driver/USB Mass Storage Class Driver comes with the CFU1U.
1-2.Package Confirmation Check Package Contents: •CFU1 •Cable •CD-ROM •Pull-out sticker •User’s manual •Software Lisence Agreement NOTE If any of these items are missing from the CFU1 retail package, contact your supplier immediately. 1-3.System Requirements and Restrictions OS •Pockert PC/Pocket PC 2002 PDA •COMPAQ(HP) iPAQ series •Toshiba GENIO, E series •Fujitsu Pocket LOOX series For more information, refer to our web site (http://www.ratocsystems.
NOTE 1.When you run some applications which put heavy load on CPU such as MP3 player, data transfer rate may get slow or the peformance of the applications may get poor. 2.If you use PC Card slot, you need to have a CF Type II Adapter. 1-4.USB Device Support •USB keyboard •USB bar code reader •USB Flash Disk •USB MO, ZIP •USB HUB •Our USB products such as CF03U, etc. For more information, refer to our web site (http://www.ratocsystems.com/english/) NOTE 1.
1-5.Before installation In order to pull CF Cards easily out of a CF Card Slot, a pull-out sticker comes with the CFU1 package. If an equivalent sticker doesn’t come with your PDA, or your PDA doesn’t have an eject button, stick this pull-out sticker as shown below in order to pull CF Cards easily.
2.Installation Before installation, you need to have connected your Windows PC to your PDA as ActiveSync. You need to connect your Windows PC in order to install the driver. The following is the directory structure in the bundled CD-ROM. Select the folder name of your PDA maker and then run [SETUP.EXE] in the folder.
2-1.CFU1 Host Driver Set Up You must install the CFU1 Host Driver first. Insert the bundled CD-ROM into a CD-ROM drive of your Windows PC and open an appropriate folder and run [SETUP] at the [HostDriver] folder. The following window will appear. Click [Yes] to install the driver. When the installation has completed, the following window will appear. Click [OK].
2-2.CFU1 HID Driver Set Up In order to connect a HID(Human Interface Device) such as an USB keyboard, USB bar code reader, you need to install the HID driver. Insert the bundled CDROM into a CD-ROM drive of your Windows PC and open an appropriate folder. Open a [English] folder and run [SETUP]. The following window will appear. Click [Yes] to install the driver. When the installation has completed, the following window will appear. Click [OK]. You need to reset your PDA to take effect.
2-3.CFU1 Mass Storage Driver Set Up In order to connect storage devices such as an USB Flash Disk, USB MO, you need to install the Mass Storage driver. Insert the bundled CD-ROM into a CDROM drive of your Windows PC and open an appropriate folder. Open a [MassStorageDriver] folder and run [SETUP]. The following window will appear. Click [Yes] to install the driver. When the installation has completed, the following window will appear. Click [OK]. You need to reset your PDA to take effect.
3.Registration and Tech-Support 3-1. How to Register We highly recommend to register yourself as our customer through our on-line registration. (http://www.ratocsystems.com/english/) 3-2. Software Update and Support -Utility UpdateThe latest utility is subject to change for improvement or bug fix.You can download the latest version from our web site. -Technical SupportYou can get a Tech support from RATOC at the following: (Open Monday - Friday,9:30A.M. to 5:00P.M.(PST)) RATOC Systems International,Inc.
4.Specifications CFU1U USB1.1 CF+ Host Card Bus Interface :CF+ and CompactFlash Specifications Rev1.4 USB Interface:USB 1.1 Host Port(12Mbps/1.5Mbps) Connector:USB1.1 series A(Female) x 1 Max Bus Power: 100mA Power Consumption :3.3V/5V 34mA at 3.3V(without any device connected) 27mA at 5V(without any device connected) Operating Requirements: Temperature 32 to 131°F(0 to 55°C) Relative Humidity 10 to 80%(non-condensing) Size:1.68 in (42.8 mm) (W) x 1.43 in (36.4 mm) (D) x 0.19 in (4.
Appendix Trademarks -Windows is a registered trademark of Microsoft Corporation. -Other brand and product names may be registered trademarks or trademarks of their respective holders. Regulatory Agency Notice FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
12
