User`s manual

10. To verify that the driver is installed correctly, right-click on [My Computer], select

[Properties], and then select the [Device Manager] tab.

If you can find two [NEC USB Open Host Controller] strings and a [RATOC CB USB

Enhanced Host Controller] string under the [Universal Serial Bus controllers], the driver

is installed correctly.

11. To connect a USB device, proceed to Chapter 4.Connecting a USB device.

To remove the CBU2 from the PC Card slot, proceed to Chapter 5.Removing the

CBU2.

The same hardware wizard shown at step 2 through 7 will open again.

Follow the same procedure.

And then, click [Next] on the wizard shown in Step 1.

9. Select the [Yes, I want to restart my computer now] option and click [Finish].